Replacing the gearbox VAZ 2107, VAZ 2106 A simple procedure and even a novice driver can cope with it. When replacing the gearbox, no adjustments are required. But if the gearbox bundled, then when replacing the gearbox, it is necessary to check the deformation of the rear axle body. This is done visually, looking through the disassembled rear bridge over the seats of the pennies. In the event that the curvature of the “stocking” of the rear axle is discovered, such a case must be replaced with a new.
Also, the reducer is produced by some tuners to change the gear ratio and improve the running qualities of the car.
This article will show the entire procedure for replacing the VAZ 2107 gearbox, VAZ 2106 with photos.
The order of execution
We suspend the rear bridge of the car, drain the oil from the bridge through the drain plug, remove the wheels and brake drums, remove the pennants. We unscrew and disconnect the back of the cardan from the flange of the bridge and take the cardan to the side.
The key “on 13” we unscrew eight bolts of attaching the gearbox to the rear axle body.
We extract the gearbox assembly.
We install the new gearbox in the reverse order. Degrees the thread of bolts of attaching the gearbox and apply a sealant. Install a new gasket. After installation, pour the oil into the hut bridge crankcase.