Unlike walls of chopped logging logs that do not require additional insulation, walls made of glued beams, foam blocks, bricks must be insulated. Even with an acceptable thickness, they cannot maintain a high temperature inside the steam room. On the inside of the wall create a multilayer “pie”.
First of all, a layer of waterproofing is laid, which serves as protecting the insulation from moisture, which can get through the wall. (Getting wet, the insulation loses its heat -shielding properties.) The role of waterproofing is usually played by rolled foil materials, in particular craft paper with a layer of foil or a foil membrane, on the one hand it is closed by polyester, on the other – polyethylene. The use of these materials also allows you to reduce heat loss. There is a less expensive solution – Permamin.
It is attached to the wall itself or to the vertical rails fixed on it. Rolls are rolled horizontally with an overlap of at least 100 mm. Foil waterproofing is also glued with metallized tape in the joints. Next, install rails with a step of 500 mm. After lay a layer of non -combustible thermal insulation.
Stone fibers mounts are mounted between the rails, and the fiberglass mats are rolled along the slats, pressing with bars. Vapor barrier is laid on top, more often from aluminum foil, with overlap and gluing with metallized tape.
Perhaps it will be interesting to you:
On the JCARSERVICE website you will find the latest auto-News, articles for auto-loving and car products.